✔ Kauf auf Rechnung
✔ Schneller Versand ab Schweizer Lager
✔ Kostenlose Lieferung ab CHF 500.-
| Im Shop verfügbar: | Verfügbarkeit prüfen |
Disponibilité en boutique
Fermer| Numéro de l'article: | M-010160 |
| Disponibilité: | En rupture de stock |
| Heure de livraison: | nach Absprache |
Les plotters de découpe de la série “CG-FXII Plus” sont des nouveaux modèles qui succèdent aux “CG-FXII”. La fonction ID Cut fournie avec nos produits permet d'économiser de la main d'œuvre et de réaliser des opérations d'impression (en combinaison avec l'imprimante JV300) et de découpe efficaces. La "fonction ID Cut" scanne les codes barre imprimés avec ID Cut, lit et découpe automatiquement selon les données de coupe. Permet des opérations de coupe continue, même sur des grands formats (>2m) sans intervention de l'opérateur.
Caractéristiques Mimaki CG-FXII Plus :
| Item | CG-75FXII Plus | CG-130FXII Plus | CG-160FXII Plus | |
| Acceptable sheet size | Width | 90 – 1,040mm (3.54 – 40.9”) | 90 – 1,580mm (3.54 – 62.0”) | 90 – 1,880mm (3.54 – 74.0”) |
| Roll weight | 18kg (39.7lb) or less | 22kg (48.5lb) or less | ||
| Roll dia | 200mm (7.87”) or less | |||
| Effective cutting area※1 | 760mm x 51m (29.9” x 167’) | 1,300mm x 51m (51.2” x 167’) | 1,600mm x 51m (63.0” x 167’) | |
| Max. auto cutting area※2 | 870mm (34.3”) | 1,425mm (56.1”) | 1,720mm (67.7”) | |
| Max. cutting speed | 100cm/s | |||
| Max. moving speed | 140cm/s (In a 45° direction and in a pen-up state) | |||
| Adjustable speed range
(cutting /plotting)※3 |
1 ‒ 10 cm/s (1 cm/s step), 10 – 50 cm/s (5 cm/s step)
50 – 100 cm/s (10 cm/s step) |
|||
| Mechanical resolution | 5 μm (0.0002”) | |||
| Command resolution | 25 μm, 10 μm (MGL-IIc), 100 μm, 50 μm (MGL-Ic1) | |||
| Repeatability | ±0.2mm (0.0079”) | |||
| Excluding shrinkage/expansion caused by the film temperature | ||||
| Accuracy assurance range | 760mm × 10m (29.9” x 0.39”) | 1,300mm × 10m (51.2” x 0.39”) | 1,600mm × 10m (63.0” x 0.39”) | |
| Depending on the specified film and cutting conditions | ||||
| Max. pressure | 500g | |||
| Pressure setting | Cutter | 10 – 20 g (2 g step), 20 – 100 g (5 g step), 100 – 500 g (10 g step) | ||
| Pin | 10 – 20 g (2 g step), 20 – 100 g (5 g step), 100 – 500 g (10 g step) | |||
| Pen | 10 – 20 g (2 g step), 20 – 100 g (5 g step), 100 – 150 g (10 g step) | |||
| Acceptable cutting sheet※4s | Vinyl up to 0.25mm (0.01”) thickness, Fluorescent sheet, Reflective sheet | |||
| Acceptable sheet for pouncing※5 | Paper thickness 0.06 – 0.13 mm (0.0024″ – 0.005″) | |||
| Applicable tools※6 | Cutter, Water based ball-point pen, Oil based ball-point | |||
| Type of command | MGL-IIc/Ic1 | |||
| Interface | RS-232C/USB | |||
| Receiver buffer size | 30Mb standard (20Mb when in sorting） | |||
| Operation environment | Temperature : 5 – 35 degrees Humidity : 35 – 75% (Rh) Non-condensationAC100V – 240V 1A 50/60Hz | |||
| Power | AC100V – 240V 1A 50/60Hz | |||
| Power consumption | 100W or less | |||
| Dimensions (W×D×H) | 1,285 x 700 x 1,217mm
(50.5” x 27.5” x 47.9”) |
1,825 x 700 x 1,217mm
(71.8” x 27.5” x 47.9”) |
2,128 x 700 x 1,217mm
(83.6” x 27.5” x 47.9”) |
|
| Weight | 47kg (104lb) | 62kg (137lb) | 70kg (154lb) | |
> Download